Wireless ambulatory blood pressure monitor Hingmed WBP-02A

See your patient's full 24 hours of blood pressure, including the night.

  • FDA Cleared
  • CE 1639
  • ISO 13485:2016
  • AAMI/ESH/ISO 81060-2:2018 – Clinically Validated
  • European Society of Hypertension (ESH)
  • British and Irish Hypertension Society (BIHS)
  • STRIDE BP
  • dabl Educational Trust
The Hingmed WBP-02A ambulatory blood pressure monitor mounted on its cuff, with no air tube
  • Wireless, one piece
  • Automatic for 24–72 hours
  • In-depth report
  • Records body posture
  • ESH, ISO, CE, FDA
  • About 200 readings per charge
  • 300 readings, unlimited via the app
  • Leather cuff, several sizes

In use at

  • Raffles Medical
  • Bewell International Clinic
  • MedArmor
  • SIG – Saigon International General Hospital
  • Bản Việt Clinic

Wireless vs. traditional tubed monitors

BioSenses

Hingmed WBP-02A

  • Tubeless design (no air hose), about 105 g
  • Records body posture at each reading
  • Re-measures within 2 minutes after a failed reading
  • Real-time data in the app and web app
  • Reports with your logo, EMR integration
Traditional

Tubed monitor

  • Air hose plus a hip-worn unit, about 280–300 g
  • Usually no body posture recorded
  • A failed reading waits for the next one
  • Data seen only after the monitor comes off
  • Basic PC software
A 24-hour trend chart of blood pressure and heart rate with the sleep period shaded

Trend chart from the BioSenses report (illustrative data).

See blood pressure at night

A single clinic reading misses day-to-night variation. The trend chart covers up to 72 hours.

A person wearing the wireless monitor on the upper arm, beside a traditional monitor with an air tube to a hip-worn unit

Wireless, about 105 g

Tubeless, with no unit at the hip. Compact and comfortable, it improves 24-hour compliance, with fewer repeat studies.

Clinical accuracy

Validated to ESH-IP 2010 (Blood Pressure Monitoring, 2019) and to AAMI/ESH/ISO 81060-2:2018 in 95 subjects. Recommended by ESH and BIHS; listed by STRIDE BP and dabl.

The WBP-02A unit flanked by the ESH, BIHS, STRIDE BP and dabl logos

Images and documents: Wellue / Hingmed. The ESH document opens in a new tab.

5–120 minAwakeAsleep
  • Supine
  • Standing
  • Still
  • Moving

Flexible measurement schedule, body posture recorded

Intervals from 5 to 120 minutes, set separately for wake and sleep. Body posture is recorded at each reading, helping physicians interpret blood pressure fluctuations.

The BioSenses web app: ambulatory blood pressure results for one recording, with patient details hidden

The BioSenses web app. Patient, doctor and clinic details are hidden.

Real-time monitoring with BioSenses

Doctors see readings while the patient is still wearing the monitor. Results go straight into your EMR/HIS.

Bilingual reports carrying your logo

Key diagnostic figures and the doctor's comments on one page.

Bio AirBP sample report, available in Vietnamese and English. The name and figures are illustrative. Select an image to see the full page.

Workflow

  1. Fit the monitor

  2. Monitor for 24 hours

  3. Sync the data

  4. Automatic report

  5. Doctor reads and diagnoses

  6. Adjust treatment

Used in

  • Cardiology
  • Endocrinology
  • Nephrology
  • Respiratory & sleep
  • Neurology
  • Inpatient wards
  • General clinics

Meets the technical requirements commonly found in tender documents

Request tender documents
  • Manufacturer certified to ISO 13485:2016
  • Oscillometric method, ±3 mmHg
  • Systolic 40–260, diastolic 20–210 mmHg
  • About 105 g (the usual requirement is ≤175 g)
  • Monitoring for ≥24 hours, up to 72 hours
  • Display shows results and errors
  • Day/night schedules, 5-minute minimum interval
  • Memory for ≥300 readings
  • 5–40 °C, 10–95 % humidity
  • Multi-device software with synced data
  • Morning surge and day/night statistics
  • HIS/EMR integration

Leave your details and BioSenses will send the technical file and certificates your organisation needs.

In the box

WBP-02A kit: monitor, cuff, charger, USB cable, carry bag and software USB stick
  • WBP-02A monitor with Bluetooth
  • Cuff, 22–36 cm
  • USB cable and charger
  • Carry bag
  • Silicone cover
  • Software and instructions on USB
  • BioSenses software, annual licence
  • 24-month warranty

Specifications

Model
WBP-02A
Weight
Commonly required in tender documents105 g including battery
Dimensions
119 × 52 × 21 mm
Display
Commonly required in tender documents2.23-inch OLED showing results and error codes
Operating conditions
Commonly required in tender documents5–40 °C; 10–95 % humidity
Storage conditions
−20 to +55 °C; humidity below 95 %

Commonly required in tender documents.

Documents

Frequently asked questions

Can the interval between readings be changed?

Yes. The interval can be set to 5, 10, 15, 20, 30, 45, 60, 90 or 120 minutes, separately for waking and sleeping hours.

What happens when a reading fails?

The monitor automatically re-measures within 2 minutes instead of waiting for the next scheduled reading.

What is the measurement range?

Systolic 40–260 mmHg, diastolic 20–210 mmHg, pulse rate 40–200 bpm, accuracy ±3 mmHg.

Does it integrate with our EMR/HIS?

Yes. BioSenses connects to your EMR/HIS using the HL7 standard. Set-up usually takes 1–2 weeks.

Does BioSenses support tender submissions?

Yes. BioSenses sends the specifications, certificates and registration documents your tender requires. Tick “Tender documents” in the form below.

Request a quote and technical file

Leave your details and BioSenses will come back with a quote and the documents your organisation needs.

Hotline 0967 917 619

What you need